Joytech Egrip II - All In One Kit
Joyetech has really taken leaps forward in creating their "All-In-One" Starter Kits, and the eGrip 2 brings everything to the table and more. As an updated platform based off the original eGrip, this device comes Standard with a 2100mAh internal battery, 3.5mL eLiquid capacity, a maximum wattage output of 80w and is fully temperature control.
Under the standard Variable Wattage Mode, the eGrip 2 has an impressive firing range of 1.0w - 80.0w and can handle coils all the way down to 0.1 ohm. Perfect under both VW and VT Mode, is the new NotchCoil with Cotton (0.25 ohm coil is included), which delivers a consistently heated hit with no ramp up time whatsoever. The VT Mode is compatible with Stainless Steel (SS316), Nickel (Ni200), and Titanium (Ti) coils and can be adjusted between 200 - 600F and fires as low as 0.05 ohm.
The 3.5mL tank is built into the device and easily refilled by removing the top section and coil. As a warning, do not fill past the MAX Fill, indicated by a mark next to the tank window. Airflow for the internal eGrip 2 tank is controlled through the top section near the mouth piece. Joyetech also included an atomizer adapter which, when screwed into the tank section, will become a 510 connection and allow you to fit any tank to the eGrip body. It is recommended to use a tool (a coin works nicely) to tighten the adapter into place.
ALSO included in this wonderful device is a colorful back-light which illuminates the tank that can be switched between 7 different colors. But wait, there's more! The eGrip 2 comes pre-installed with the popular Flappy Bird game which can be played right on the OLED screen! The game even comes with Easy, Medium, and Hard modes.
(1) eGrip 2 Device
(1) NotchCoil 0.25 DL Atomizer Head
(1) BF SS316 0.5 ohm DL Atomizer Head
(1) BF Clapton 1.5 MTL Atomizer Head
(1) BF RBA M&L Head (Vertical Rebuild)
(1) Drip Tip
(1) Micro USB Cable
(1) Atomizer Adapter
Dimensions: 3-7/8" x 1-3/4" x 7/8"
All-in-One Personal Vaporizer
Battery Capacity: Built-in 2100mAh Battery
3.5ml e-Liquid Capacity
Wattage Output: 1.0 - 80.00w
Variable Temperature Control : Nickel / Titanium / Stainless Steel 316/ TCR
Temperature Control Range: 100 - 315C / 200 - 600F
Bypass (Direct Output Voltage) Mode
Resistance Range: 0.05-1.5ohm for Variable Temperature Control Mode
Resistance Range: 0.1-3.5ohm for Variable Wattage and Bypass Mode
Utilizes the Joye Cubis Atomizer Heads such as the Joye NotchCoil SS316 0.25ohm Includes (1) NotchCoil 0.25ohm DL, (1) BF SS316L 0.5ohm DL, (1) BF Clapton 1.5ohm MTL Atomizer Heads
Includes (1) BF Rebuildable Atomizer M&L Head (Vertical Rebuild)
510 Threaded Tanks may be used with the included Atomizer Adapter
Top Fill Design
Large 0.96" OLED Screen
Real Time Clock Display
Features 7 Different e-Liquid Illumination LED Lights
Bottom Ventilation Holes
Micro USB Charging Port